FBHF┌7á7'à NFL Forecaster for DOS 4.0d
 Copyright (c) 1994-95 by George Tylutki
 100% Cotton Software, RR 1 Box 1622, Hop Bottom, PA 18824 USA
Æ

 ┌────────────────────────────────────────────┐
 │ Help for NFL Forecaster for DOS 4.0d Setup │
 └────────────────────────────────────────────┘
ê
Please read this entire topic before installing Forecaster.  It only takes a few minutes. Then press the ESC key to close this window. +
NFL Forecaster requires DOS 3.0 or later. τ
If the NFL season has already begun, be sure to read "Catching Up" in Forecaster's on-line help.  If this is the first time that you have installed Forecaster, you should read "Trying Out Forecaster" in Forecaster's on-line help. 
Contents: t Installing NFL Forecaster
 Uninstalling NFL Forecaster
 Packing List
 Error messages
 Why Register NFL Forecaster?
╚╛⌠┘,÷ÉX'H INSTALLING NFL FORECASTER          Contents
 ─────────────────────────
ª
Forecaster's setup program makes NO changes to your AUTOEXEC.BAT or CONFIG.SYS files and it does not change your PATH statement (or any other environment variable). »
Setup will correctly install Forecaster from one drive and/or directory to another (that is, from a:\ to c:\fcast or from c:\temp to c:\sports or from c:\fcast to c:\fcast). ï
FCAST.CFG, FCAST.HLP, NAMES.NFL, SCHEDULE.NFL and MAIN-DTA.NFL must be in the same directory as FCAST.EXE or the directory in which they are placed must be in your DOS PATH statement (see your DOS manual) in order for Forecaster to find them.  When Forecaster needs a file, it first looks in the current directory, then the startup directory and then in the directories in your PATH statement. T
Do NOT install Forecaster for DOS in the same directory as Forecaster for Windows. Q
 1. Setup needs to know the source path
 ──────────────────────────────────────
!Setup will offer as a default the path from which it was run. Most of the time this is acceptable and you should press the Tab key to move to the input box for the destination path. (It's very unlikely that Setup would be in one directory and the rest of the Forecaster files in another.) m
 2. You need to type in the complete destination path
 ────────────────────────────────────────────────────
Enter the drive and directory to which you want Forecaster installed.  Setup will offer as a default "c:\fcast."  For most people, this is acceptable.  If you want to install Forecaster somewhere else, type in the complete path: drive:\subdirectory. For example, you might enter "c:\sports\football".  Or, to install Forecaster on a floppy disk in your b: drive you might type "b:".  NOTE: the complete Forecaster package will not fit on a 360K or 720K floppy; Setup will issue an error message and cancel if there is not enough disk space. M
 3. You need to choose a display type
 ────────────────────────────────────
óPress one of the radio buttons to choose installation for a color or monochrome system.  If you have a color display adapter card and a color monitor (CRT), then press the "Color" radio button.  If you have a monochrome display adapter card and a monochrome monitor (CRT), press the "Monochrome" button.  If you have a color display adaptor card and a monochrome monitor (MCGA, for example), press the "Color" button. ù
From within NFL Forecster you can modify any of its colors by choosing Options\Views\Colors from its menu.  Because there are many color choices, Forecaster is shipped with two configuration files: COLOR.CFG and MONOCHRM.CFG.  They are identical except for the color settings.  Setup will rename one of these files to FCAST.CFG during installation depending upon which display-type radio button you press. 
FCAST.CFG contains all of Forecaster's various options settings. Options are always saved to FCAST.CFG, so you might want to make backup copies of both .CFG files to make it easier to later move Forecaster from a color to a monochrome system or vice versa. U
 4. Press the "Install Forecaster" button
 ────────────────────────────────────────
When you press the "Install Forecaster" button, Setup will (1) copy the Forecaster files from the source path to the destination path.  If the source and destination paths are identical, Setup will not attempt to copy the files.  It will also rename the appropriate .CFG file. m
If it finds that there is already a configuration file (FCAST.CFG) in the destination path, it will ask if you want to replace it.  If you have customized an earlier version of Forecaster, you should answer "No" so that your FCAST.CFG file will not be replaced.  (The format of the version 4.0d FCAST.CFG is identical to the format of the version 2.0d FCAST.CFG.) @
If you already have a MAIN-DTA.NFL file in the destination path, Setup will ask if you want to replace it with the new MAIN-DTA.NFL.  If you have used NFL Forecaster's Quick or Enter Scores functions to enter scores, the updated rankings have been saved to MAIN-DTA.NFL.  The updated rankings will be erased if the new MAIN-DTA.NFL replaces the one already on your disk.  If you have been using NFL Forecaster each week, your MAIN-DTA.NFL is up-to-date.  The new MAIN-DTA.NFL may not be up-to-date (if you are installing new version of NFL Forecaster during the 5th week of the season, for example).  If you are installing a registered version of NFL Forecaster, MAIN-DTA.NFL will be up-to-date to the day it was shipped.  If you are installing an unregistered version, MAIN-DTA.NFL is up-to-date for the first week of the season. ï
Therefore, if you are installing Forecaster before the NFL season has begun, you should PROBABLY LET Setup replace the MAIN-DTA.NFL file. »
If you're installing Forecaster after the NFL season has begun AND you have been using Forecaster each week, you should PROBABLY NOT LET Setup replace the MAIN-DTA.NFL FILE. ░
If you are installing Forecaster after the NFL Season has begun and you have NOT been using Forecaster each week, you should PROBABLY LET Setup replace the MAIN-DTA.NFL file. /
 5. Setup is completed
 ─────────────────────
CLog on to the drive and directory that contain the installed Forecaster files and type "fcast" or (if Forecaster is installed on your c: drive) type "c:\fcast\fcast".  See your DOS manual for information about placing the Forecaster directory in your PATH statement so that you can run Forecaster from any other directory. d%'. PACKING LIST          Contents
 ────────────
ε
 Files installed in the destination path:
 ────────────────────────────────────────
 FCAST.HLP -- the on-line help file
 FCAST.EXE -- the program file
 FCAST.DOC -- printable documentation
 COLOR.CFG -- a configuration file with color settings for a
   color system; Setup may rename it FCAST.CFG
 MONOCHRM.CFG -- a configuration file with monochrome settings
   for a monochrome system; Setup may rename it FCAST.CFG
 NAMES.NFL -- contains team and city names
 MAIN-DTA.NEW -- the main data file; renamed to MAIN-DTA.NFL
   after setup
 SCHEDULE.NFL -- the 1995-96 schedule file
 WEEK-??.yy -- one or more archive files (for example, week-17.94)
 FCAST.ICO -- an icon that can be used to install Forecaster on
   Windows desktop (see on-line help)
░
 Other files:
 ────────────
 SETUP.EXE -- the program that installs NFL Forecaster; probably
   delete after installation is completed
 SETUP.HLP -- the on-line help file for setup; probably delete
   after installation is completed
 README.1ST -- a text file that contains latest information;
   probably delete after reading
 PRODUCTS.TXT -- contains a description of 100% Cotton Software
   products
 VENDINFO.DIZ -- contains important information about
   registration, warranty, licensing, etc.; probably delete
   after reading; the same information is contained in the
   on-line help file
 FILE-ID.DIZ -- short description of Forecaster for vendors;
   delete after installation
d'
2 ERROR MESSAGES          Contents
 ──────────────
X
Rarely are there any problems during Forecaster setup, especially since it does not make permanent changes to your system configuration files and the installation of Forecaster is rather simple compared to larger, more complex applications.  In the unlikely event that you do encounter problems, you may find the following information useful. 
If an error occurs during installation, Setup will issue an error message.  Many of the messages are self-explanatory, such as "#5 Invalid source path (it doesn't exist)" or "#7 Not enough free disk space to install NFL Forecaster."  Others require some explanation. ½
 #9 Unable to open source file
 #11 Error reading source file
 #12 Error reading source file or writing destination file
 #13 Error reading source file's date/time stamp
/These messages indicate that (1) the read-only attribute of a file already on your disk (FCAST.CFG, for example) is set, (2) there is something wrong with one of the original files, or (3) you have simply have entered the wrong source path.  Remove the read-only attribute (see your DOS manual) if it is set, run Setup again and enter the correct source path.  If you continue to receive one or more of these messages, reboot and run Setup again.  If this doesn't work, obtain another copy of NFL Forecaster from the source from which you got the first copy. ù
 #10 Unable to open destination file
 #12 Error reading source file or writing destination file
 #14 Error reading destination file's date/time stamp
█These messages indicate that (1) the read-only attribute of a file already on your disk (FCAST.CFG, for example) is set or (2) there is something wrong with the disk to which you are attempting to install Forecaster.  Remove the read-only attribute (see your DOS manual) if it is set and run Setup again.  If this doesn't work, try rebooting and running Setup again.  If you still receive one or more of these messages, you should use a disk-diagnostic/ disk-repair program. '
 #16 Unable to erase old MAIN-DTA.NFL
NFL Forecaster requires a file named MAIN-DTA.NFL; it writes each week's rankings to this file (see on-line help for more information).  This message indicates that you have chosen to replace your MAIN-DTA.NFL file with the new one shipped with Forecaster and Setup is unable to complete your request.  So, when Setup finishes, you will have MAIN-DTA.NFL or MAIN-DTA.NEW or both or neither on your disk.  You can (1) try running Setup again or (2) copy MAIN-DTA.NEW from the original disk to your disk and rename it MAIN-DTA.NFL. $
 #17 Unable to rename MAIN-DTA.NEW

This error message occurs when there is something wrong with the disk to which you are attempting to install Forecaster.  Try rebooting and running Setup again.  If you still receive one or more of these messages, you should use a disk-diagnostic/ disk-repair program. E
 #18 Unable to delete old FCAST.CFG
 #19 Unable to rename FCAST.CFG
╘When Setup finishes, you will have one or more of COLOR.CFG, MONOCHRM.CFG and FCAST.CFG in the destination path.  You can (1) try running Setup again or (2) copy/rename the appropriate .CFG file for your system. d'L UNINSTALLING NFL FORECASTER          Contents
 ───────────────────────────
ª
Forecaster's setup program makes NO changes to your AUTOEXEC.BAT or CONFIG.SYS files and it does not change your PATH statement (or any other environment variable). ⌡
Therefore, to uninstall Forecaster (1) delete all of the files in the Forecaster directory and then (2) remove the Forecaster directory.  The default Forecaster directory name offered by Setup is c:\fcast; you may have chosen a different name. d''N WHY REGISTER NFL FORECASTER?          Contents
 ────────────────────────────
6
NFL Forecaster is a copyrighted shareware product; it is not freeware or public domain.  You can try it before you buy it and you are encouraged to give copies to others  If you use it after 30 days, you must register it.  For information about warranty, support and licensing, see Forecaster's on-line help. 5
When you register NFL Forecaster, you will receive: ò
1. the latest version of the program (with MAIN-DTA.NFL current as of shipping day) which does not have any request-for- registration dialog boxes; K
2. unlimited, life-time, free (not toll-free) telephone and mail support; O
3. a complete set of archive files: 10 years of scores, spreads and rankings; A
4. 25% discount coupon: toward purchase of annual update disk); h
5. $2.00 coupon: toward registration of any other Cotton Software product (see the file PRODUCTS.TXT); N
6. JCSM Shareware Collection CD certificate: 4,500 programs for $9.95 + S&H; é
7. and, of course, the appreciation of programmers who strive to produce inexpensive, quality, useful and entertaining software. ┤
8. Teachers are over-worked and underpaid.  Therefore, any teacher who registers directly to Cotton Software using his or her school letterhead will receive a $3.00 rebate check. _
You can register NFL Forecaster by sending a check or money order for $20.00 (US dollars) to: D    100% Cotton Software
    RR 1 Box 1622
    Hop Bottom, PA 18824
COrders from outside of the United States should add $3.00 for S&H. h
You can print a registration form by choosing Help/Print Registration Form from NFL Forecaster's menu. ^
Credit card orders (MC, Visa, Amex, Discover) may be made through Public (software) Library: ñ  PHONE: 800-2424-PsL 713-524-6394
  FAX: 713-524-6398
  CIS EMAIL: 71355,470
  MAIL: Public (software) Library
        PO Box 35705
        Houston, TX 77235-5705
╢
Your order will be processed more quickly and efficiently if you refer to ITEM #11343.  Be sure to tell the operator that you want the REGISTERED version of NFL Forecaster for DOS. ƒ
THE ABOVE PSL NUMBERS ARE FOR ORDERS ONLY.  Any questions about the status of the shipment of the order, refunds, registration options, product details, technical support, volume discounts, dealer pricing, site licenses, etc. must be directed to 100% Cotton Software (717-289-4019).  To insure that you get the latest version, PsL will notify us the day of your order and we will ship the product directly to you. d('
d╚,É⌠X        p0º+ó-                